[Jul 28, 2025] ExamTorrent CTS-I dumps & AVIXA Certification sure practice dumps
AVIXA CTS-I Actual Questions and Braindumps
AVIXA CTS-I Exam Certification Details:
| Schedule Exam | Pearson VUE |
| Non-Member Exam Price | $575(USD) |
| Duration | 150 mins |
| Sample Questions | AVIXA CTS-I Sample Questions |
| Number of Questions | 110 |
| Exam Name | AVIXA Certified Technology Specialist - Installation (CTS-I) |
| Books / Training | Candidate Handbook |
AVIXA CTS-I - Installation Exam Syllabus Topics:
| Topic | Weight |
|---|---|
| Duty A: Conducting Pre-Installation Activities | 20% |
| Task 1: Review Audiovisual Project Documentation | 4% |
| Task 2: Conduct Technical Site Survey | 4% |
| Task 3: Prepare for Audiovisual Installation | 4% |
| Task 4: Evaluate Overall Facility Readiness | 4% |
| Task 5: Conduct On-Site Preparations for Installation | 4% |
| Duty B: Conducting Site Rough-In/First-Fix | 10% |
| Task 1: Deinstallation of Existing Equipment and cabling | 2% |
| Task 2: Mount Substructure | 4% |
| Task 3: Pull Cable | 4% |
| Duty C: Installing Audiovisual Systems | 38% |
| Task 1: Assemble AV Rack | 4% |
| Task 2: Wire the AV Equipment Rack | 5% |
| Task 3: Distribute AV Equipment | 4% |
| Task 4: Mount AV Equipment | 4% |
| Task 5: Terminate Cables | 5% |
| Task 6: Configure Network Properties of Equipment | 4% |
| Task 7: Load Configuration and Control Programs | 4% |
| Task 8: Test the AV System | 4% |
| Task 9: Calibrate the AV System | 4% |
NEW QUESTION # 109
What will a stakeholder analysis help you identify?
Response:
- A. The changes that were made to the architectural drawings
- B. The original timeline for the project
- C. The client's concerns and fears about the AV system
- D. The GC's budget for the AV system
Answer: C
NEW QUESTION # 110
The published design weight of a speaker array with mounting hardware totals 212 pounds (96 kilograms). What minimum weight should the substructure and mounting assembly be able to support?
Response:
- A. 500 pounds (227 kilograms)
- B. 1,060 pounds (480 kilograms)
- C. 424 pounds (192 kilograms)
- D. 2,120 pounds (962 kilograms)
Answer: B
NEW QUESTION # 111
Which of the following documents should an AV integrator submit in the event that a manufacturer has discontinued a projector model?
Response:
- A. Construction change directive (CCD)
- B. Progress report (PR)
- C. Request for change (RFC)
- D. Letter of transmittal
Answer: C
NEW QUESTION # 112
At the end of the project, once installation and verification are complete, acceptance of the completed system is documented in a commissioning report and typically signed by:
Response:
- A. The contractor and/or the head of the technical staff
- B. The systems engineer and/or the head of the legal department
- C. The owner and/or the general contractor
- D. The head technician and/or the building architect
Answer: C
NEW QUESTION # 113
Which of the following should a maintenance log include?
Select all that apply.
Response:
- A. Devices replaced
- B. Name of technician
- C. Description of problem
- D. Date of service
Answer: A,B,C,D
NEW QUESTION # 114
Which of the following is true of an IP control system?
Response:
- A. It works with all models of equipment.
- B. It runs machine code only.
- C. It can be connected to equipment over the LAN.
- D. It is slower than serial control systems.
Answer: C
NEW QUESTION # 115
What is a best practice when selecting fasteners for mounting AV equipment?
Response:
- A. Use bolts that are extra-long.
- B. Use bolts with smooth heads.
- C. Use bolts that are available near the job site.
- D. Use standards-rated bolts.
Answer: D
NEW QUESTION # 116
A key objective for mounting AV equipment in a rack is to ___.
Response:
- A. ensure only technical personnel can access it
- B. hide it discretely in a closet
- C. roll the gear in and out easily
- D. protect the integrity of the system
Answer: D
NEW QUESTION # 117
Which device is used for sending the same video signal to multiple destinations?
Response:
- A. Scan converter
- B. Line driver
- C. Matrix switcher
- D. Distribution amplifier
Answer: D
NEW QUESTION # 118
Which abbreviation on a drawing tells you that you will not need to install a specific display screen?
Response:
- A. OC
- B. NTS
- C. OFOI
- D. OD
Answer: C
NEW QUESTION # 119
A projector weighing 429 pounds (195 kilograms) should be mounted only to what type of surface?
Response:
- A. Drywall in conference room
- B. Ceiling tile of an auditorium
- C. Front wall in a classroom
- D. Building structural support or blocking
Answer: D
NEW QUESTION # 120
_____ draws the video image on the display in a sequence of lines from top to bottom.
Response:
- A. Progressive scanning
- B. Frame rate
- C. Refresh rate
- D. Interlaced scanning
Answer: A
NEW QUESTION # 121
Why is it better to test control systems in the shop?
Select all that apply.
Response:
- A. It allows more time to fix problems.
- B. It may provide better access to help from internal teams.
- C. It allows time for longer breaks.
- D. It prevents customers from asking questions.
Answer: A,B
NEW QUESTION # 122
What is the industry best practice when troubleshooting?
Response:
- A. Change the signal analyzer
- B. Change the faulty device right away
- C. Change only one thing at a time
- D. Change the signal generator
Answer: C
NEW QUESTION # 123
Which adjustment on a video wall processor will compensate for the borders between the individual displays?
Response:
- A. Overscan
- B. EDID
- C. Frame rate reduction
- D. Mullion adjustment
Answer: D
NEW QUESTION # 124
A technician installs a condenser microphone. It is not picking up audio. What is the MOST LIKLEY cause?
Response:
- A. Phantom power is turned off
- B. The microphone is defective
- C. The cable run is too long
- D. Pins 2 and 3 are swapped at the XLR connector
Answer: A
NEW QUESTION # 125
What devices can interfere with DECT 6.0 wireless microphones?
Response:
- A. Wireless routers
- B. Bluetooth devices
- C. Cordless phones and headsets
- D. Laptops with Wireless network cards
Answer: C
NEW QUESTION # 126
Which of the following is mic-level voltage?
Response:
- A. 0.316 volts (-10 dBV)
- B. to 0.0003 volts (-60 to -50 dBu)
- C. 1.23 volts (+4 dBu)
- D. Up to about 100 volts
Answer: B
NEW QUESTION # 127
Which statement accurately describes what you should do when de-installing existing equipment?
Response:
- A. Remove the connecting cables
- B. Dispose of equipment right away
- C. Smash the hardware so that data cannot be stolen
- D. Call an electronic waste recycling contractor
Answer: A
NEW QUESTION # 128
......
Latest CTS-I Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://prep4sure.examtorrent.com/CTS-I-exam-papers.html
