2022 220-1001 Question Bank: Free PDF Download Recently Updated Questions
220-1001 Certification Exam Dumps with 752 Practice Test Questions
220-1001 Exam topics
Candidates must know the exam topics before they start of preparation. Because it will really help them in hitting the core. Our 220-1001 exam dumps will include the following topics:
- Hardware and Network Troubleshooting 27%
- Mobile Devices 14%
- Networking 20%
- Virtualization and Cloud Computing 12%
- Hardware 27%
Certification Path
The CompTIA A+ Core 1 certification includes only one 220-1001 certification exam.
NEW QUESTION 431
A technician is setting up a new SOHO router for a home user. The user has a media server to be accessible from the Internet while the user is traveling.
Which of the following should the technician configure to allow access to the server from the Internet?
- A. QoS
- B. NAT
- C. MAC filtering
- D. Port forwarding
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 432
The IT department recently upgrade client computer for the graphics department. A user reports the new computer has not worked since up. It , makes unusual sound when pressing the power button.
A technician verifies the power cable works and the computer is connected properly to both data and power. The monitor powers on but display the message NO source. Which of the following BEST explains the cause of this problem?
- A. The error beep codes on POST.
- B. The computer is overheating.
- C. There is insufficient power to the computer
- D. There is back screen on system boot.
Answer: C
NEW QUESTION 433
A business owner wants to provide security to laptop users with the ability to charge their devices, access corporate LAN resources, and allow for a variety of their removable hardware.
Which of the following devices would BEST meet the owner's needs?
- A. USB hub
- B. Thunderbolt
- C. Port replicator
- D. Docking station
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 434
A technician Installs a new PoE-capable wireless access point using a 200ft (61m) cable, but the access point does not power on when plugged Into the Ethernet cable. The technician verifies the Ethernet cable Is plugged Into a working switchport. Which of the following should the technician do to resolve this issue?
- A. Replace the Ethernet cable with Cat 3.
- B. Install a power injector.
- C. Set the switchport to autonegotiate.
- D. Relocate the AP closer to the switch.
Answer: B
NEW QUESTION 435
A technician is installing VoIP phones. Which of the following extra cables would the technician MOST likely bring to the site to complete the connections?
- A. SATA terminated cables
- B. RJ45 terminated cables
- C. RG-59 terminated cables
- D. BNC terminated cables
Answer: B
NEW QUESTION 436
Which of the following peripherals would a company use to take inventory quickly and update price tags for products? (Choose two.)
- A. NFC device
- B. Barcode scanner
- C. Magnetic reader
- D. KVM switch
- E. Label printer
- F. Flatbed scanner
Answer: B,C
NEW QUESTION 437
Megan, the CEO, is unable to connect to the company's network on her company-issued enterprise tablet when in the office, however, it works perfectly from home. All the corporate laptops are connected to the wireless network without issue. She has asked you for assistance in getting the device online.
INSTRUCTIONS
Review the network diagrams and device configurations to determine the cause of the problem and resolve any discovered issues.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.




Answer:
Explanation:
Click on Tablet Office 3
Click on 802.11 and Select a
Click on SSID and select CORP
At Wireless Security Mode, Click on Security Mode
Select the WPA2
Megan needs to connect to the CORP SSID, using 2.4GHZ. The selected security method chose should be WPA2, and the password should be set to Corpsecure1.

NEW QUESTION 438
A company requires the ability to control, optimize, and report user network storage automatically. Which of the following cloud concepts can achieve this?
- A. Measured service
- B. Resource pooling
- C. Rapid elasticity
- D. On demand self-service
Answer: C
Explanation:
Cloud computing systems control and optimize resource use by an abstract metering capability appropriate to the type of service used, such as storage, processing power, network bandwidth, or number of and active user accounts. Resource usage can be monitored, controlled, and reported, providing transparency for both the provider and consumer of the utilized service.
NEW QUESTION 439
Drag each mobile technology to the description of its use. Some answers will not be used.
Answer:
Explanation:
Explanation
NEW QUESTION 440
A junior technician is working on a new server that will Intercept web traffic and file requests from users computers and retrieve the necessary content. Which of the following is the technician configuring?
- A. Web server
- B. DHCP server
- C. Authentication server
- D. Proxy server
- E. DNS server
- F. File server
Answer: E
NEW QUESTION 441
A customer purchased a device that can perform routing tasks, firewall tasks, deep packet .......
- A. DHCP server
- B. IDS appliance
- C. UTM appliance
- D. Proxy server
- E. IPS appliance
Answer: A
NEW QUESTION 442
A user reports that a laptop is not connecting to the corporate wireless network. A technician confirms a with a smartphone that the corporate wireless network is available and can be accessed. the technician observes that the Ethernet connection to the corporate network is working. The technician disconnects the Ethernet cable.
Which of the following should the technician do NEXT to troubleshoot this problem?
- A. Confirm that the correct wireless network is selected.
- B. Confirm that the laptop wireless card is turned on.
- C. Confirm the user's network login ID and password.
- D. Confirm that the laptop is in range for the access point.
Answer: B
NEW QUESTION 443
A customer's workstation will not boot A technician runs diagnostics on the system and discovers it is set up in a RAID 0 configuration, and a single SATA hard drive failed. The system was set up for Performance. Once repaired the customer request redundancy be built into the system and an increase in performance. Which of the following describes how the technician should set up the new RAID configuration?
- A. RAID 1 configuration that will utilize new SSD.
- B. RAID 2 configuration that will allow the loss of a hard drive without failure.
- C. RAID 10 configuration utilizing HDD
- D. RAID 6 configuration that will allow the loss of two hard drives without failure.
Answer: C
NEW QUESTION 444
A company wants to purchase new equipment for its help desk team. Team members work in a 24/7 environment and share desks with coworkers from other shifts. The company already has dual monitors set up on each desk but decides replacing the existing desktops with laptops would be the best business decision to support the mobility needs.
Which of the following laptop features or accessories would be BEST suited for this business environment?
- A. Docking stations
- B. Privacy filters
- C. Port replicators
- D. KVM
- E. VPN
Answer: A
NEW QUESTION 445
The IT department recently upgrade client computer for the graphics department. A user reports the new computer has not worked since up. It , makes unusual sound when pressing the power button.
A technician verifies the power cable works and the computer is connected properly to both data and power.
The monitor powers on but display the message NO source. Which of the following BEST explains the cause of this problem?
- A. The computer is overheating.
- B. The error beep codes on POST.
- C. There is insufficient power to the computer
- D. There is back screen on system boot.
Answer: A
NEW QUESTION 446
Joe, a user , wants his desktop RAID configured to allow the fastest speed and the most storage capacity. His desktop has three hard drives. Which of the following RAID types should a technician configure to achieve this?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 447
A computer freezes shortly after loading the operating system. A technician inspects the computer and obtains the following diagnostic information:
Which of the following should the technician investigate further?
- A. The GPU temperatures
- B. The memory clock speed settings
- C. The power supply voltage
- D. The integrity of the hard drive
- E. The CPU temperatures
Answer: E
NEW QUESTION 448
Which of the following network servers would be MOST useful in translating a URL into an IP address?
- A. Web server
- B. Print server
- C. DHCP server
- D. Mail server
- E. DNS server
Answer: E
NEW QUESTION 449
An administrator is configuring a virtualization workstation that will host several mission-critical VMs for the human resources department The workstation will be required to support multiple users at once, and large amounts of data will be accessed daily Which of the following components will BEST meet these requirements? (Select THREE).
- A. RAID 6 array
- B. Solid-state drives
- C. Redundant PSUs
- D. Quad-core CPU
- E. RAID 0 array
- F. High-end GPU
- G. Additional RAM
Answer: A,D,G
NEW QUESTION 450
A high-end workstation is operating as expected, but two of the four SATA drives are displaying solid fault lights Which of the following is the MOST likely reason for this issue?
- A. An M 2 boot device is being used
- B. The RAID controller cache is turned on
- C. RAID 5 is being used
- D. The RAID level of the disk array is 10
Answer: B
NEW QUESTION 451
Which of the following describes the network type that is created when connecting a Bluetooth headset to a cell phone?
- A. WAN
- B. MAN
- C. PAN
- D. LAN
Answer: C
NEW QUESTION 452
A technician is configuring a new desktop and wants to implement full disk encryption. When attempting this task, the technician gets an error stating the device cannot be encrypted. Which of the following does the technician need to enable so the drive can be encrypted?
- A. EFS
- B. BIOS
- C. UEFI
- D. TPM
Answer: D
NEW QUESTION 453
......
New 220-1001 Exam Dumps with High Passing Rate: https://prep4sure.examtorrent.com/220-1001-exam-papers.html
