71300X Dumps for Pass Guaranteed - Pass 71300X Exam 2022
71300X Exam Dumps - Try Best 71300X Exam Questions from Training Expert ExamTorrent
NEW QUESTION 37
To watch Avaya Session Border Controller for Enterprise (SBCE) messages in real-time as they pass through the SBCE, which tool on the SIP command line do you use?
- A. trace
- B. traceSM -m
- C. traceTOOL
- D. traceSBC
Answer: D
Explanation:
Explanation
The tcpdump tool is the main troubleshooting tool of Avaya SBCE, which can capture network traffic. Using tcpdump is a reliable way to analyze the information arriving to and sent from the SBC.
However, tcpdump has its own limitations, which can make troubleshooting difficult and time consuming.
This traditional tool is not useful in handling encrypted traffic and real-time troubleshooting.
The traceSBC tool offers solutions for both issues.
In Real-time mode, traceSBC must be on active Avaya SBCE. traceSBC is started without specifying a file in the command line parameters. The tool automatically starts processing the log files. The live capture can be started and stopped anytime without affecting service.
Example:
# traceSBC
References: Troubleshooting and Maintaining Avaya Session Border Controller for Enterprise (December
2015), page 27
https://downloads.avaya.com/css/P8/documents/101014063
NEW QUESTION 38
In which two locations is the Switch Password configured?
- A. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
- B. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
- C. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
- D. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
Answer: B
Explanation:
Explanation
Enabling AE Services refers to administering the transport link between Communication Manager and AE Services.
Procedure
1. Type change ip-services. Communication Manager displays the IP SERVICES form
2. Complete Page 1 of the IP SERVICES form
3. Complete Page 3 of the IP SERVICES form as follows.
a. In the AE Services Server field, type the name of the AE Services server b. In the Password field, create a password.
This is the password that the AE Services administrator must set on the AE Server (Communication Manager Interface > Switch Connections > Edit Connection > Switch Password). The passwords must exactly match on both Communication Manager and the AE Services server.
References: Avaya Aura Application Enablement Services Administration and Maintenance Guide, Release
6.3 (June 2014) , page 26
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 39
You need to connect Avaya BreezeTM platform that is hosting Avaya Aura Presence Services Snap-in with Avaya Aura Session Manager (SM).
Which three are needed? (Choose three.)
- A. ports UDP 5060 and TLS 5061
- B. one Entity Link from SM to Avaya Aura Presence Services Snap-in
- C. TLS 5061 and TLS 5062
- D. one Entity Link from SM to Avaya BreezeTM
- E. ports TCP 5060 and UDP 5060
Answer: B,C,D
Explanation:
Explanation
BD: Administering Entity Link between Presence Services Cluster SIP Entity and Session Manager Procedure
1. On the System Manager web console, navigate to Elements > Routing > Entity Links.
2. In the Name field, enter a name for Entity Link.
3. In the SIP Entity 1 field, select the Session Manager instance.
4. In the Protocol field, select TLS.
5. In the Port field, type 5062.
Note: Note that this port number cannot be the same as the port number administered in
"Administering Entity Link between Avaya Breeze and Session Manager".
CD: Administering Entity Link between Avaya Breeze and Session Manager.
About this task
Create an En2tity Link to connect Session Manager to Avaya Breeze. You must administer separate Entity Links for Avaya Breeze servers in order to open SIP listeners on the designated ports.
Session Manager requires a Listen Port with the Listen Port as 5061, Protocol as TLS, and Default Domain as the login domain of endpoint devices. Without this, PPM will fail for SIP endpoints.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), pages 25-26
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 40
Avaya Aura Presence Services 7.x is implemented on Avaya BreezeTM (formerly known as Engagement Development Platform (EDP)).
When looking at Elements > Engagement Development Platform > Service Management, which status would you expect for a Presence Services snap-in that is ready to support Avaya Aura Presence Services?
- A. Accepting
- B. Loaded
- C. Installed
- D. Active
Answer: A
Explanation:
Explanation
Enabling Avaya Breeze cluster running Presence Services
Before you begin
Ensure that the Avaya BreezeTM servers running the Presence Services are recovered / powered up.
Procedure
1. On the System Manager web console, navigate to Elements > Avaya Breeze > Cluster Administration.
2. Select the Presence Services cluster, and change the Cluster State to Accept New Service.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), page 48
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 41
You are creating the identity certificates that must be installed in the Avaya Session Border Controller for Enterprise (SBCE).
Which statement about installing the certificate files in the SBCE is true?
- A. Both the PEM and Key files must be in a zip file.
- B. The cert file and the Key filenames generated by the Certificate Authority must be different.
- C. The cert file and the Key filenames generated by the Certificate Authority must match.
- D. The SBCE must be rebooted before the files installation.
Answer: C
NEW QUESTION 42
On Avaya Session Border Controller for Enterprise (SBCE), which statement about how to examine messages with Wireshark is true?
- A. You have to start and stop the .pcap file using command line.
- B. You can start and stop a Packet Capture in the EMS web GUI and then you can open the .pcap file with Wireshark.
- C. Wireshark runs directly on Avaya Session Border Controller for Enterprise (SBCE).
- D. They cannot be examined on this version.
Answer: B
Explanation:
Explanation
Viewing the Packet Capture with Wireshark.
0. Start a Packet Capture in the EMS web GUi.
1. After the capture completes, click the Capture tab.
2. Double-click on the capture file name.
3. The File Download window opens.
4. Click Open.
The Wireshark application opens the trace.
Note: The Wireshark call tracing tool can be used on virtual desktop for vLabs.
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
468
NEW QUESTION 43
WebRTC is used for which type of calls?
- A. calls originated from internal and external web browsers
- B. video calls only
- C. calls originated from internal web browsers only
- D. calls originated from external web browsers only
Answer: A
Explanation:
Explanation
The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura can deliver calls.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 6
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 44
Which statement about the SIP Entities to support Avaya Aura Presence Services is true?
- A. Two SIP Entities are built to the same SM100 IP address of each node. One is of Type = "Engagement Development Platform", and the other is of Type = "Presence Services".
- B. Only one SIP Entity is built of Type = "Engagement Development Platform", which uses the SM100 IP Address of the Avaya BreezeTM node.
- C. Two SIP Entities are built to the same SM100 IP address of each node. One is of Type = "Engagement Development Platform", and the other is of Type = "Other".
- D. Only one SIP Entity is built of Type = "Presence Services", which uses the SM100 IP address of the Avaya BreezeTM node.
Answer: B
NEW QUESTION 45
Which statement describes Cross-Origin Resource Sharing (CORS)?
- A. It allows for signaling-groups to be used by more than one trunk-group.
- B. It is a W3C specification that allows cross-domain communication from the browser.
- C. It is a network setup by which an Avaya Aura Media Server (AAMS) can be used by more than one Avaya Aura Communications Manager (CM).
- D. It is making DSP resources available regardless of the originating location of a call.
Answer: B
Explanation:
Explanation
Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources (e.g. fonts) on a web page to be requested from another domain outside the domain from which the first resource was served. A web page may freely embed cross-origin images, stylesheets, scripts, iframes, and videos.
Note on the History of CORS:
Cross-origin support was originally proposed by Matt Oshry, Brad Porter, and Michael Bodell of Tellme Networks in March 2004 for inclusion in VoiceXML 2.1 to allow safe cross-origin data requests by VoiceXML browsers.
In May 2006 the first W3C Working Draft was submitted. In March 2009 the draft was renamed to
"Cross-Origin Resource Sharing" and in January 2014 it was accepted as a W3C Recommendation.
References: https://en.wikipedia.org/wiki/Cross-origin_resource_sharing
NEW QUESTION 46
A field engineer runs the Installation Wizard to install the Avaya Session Border Controller for Enterprise (SBCE).
Which statement about the Domain Name Service (DNS) configuration is true?
- A. A DNS address needs to be configured, even if it is unused and/or unreachable.
- B. A DNS address always needs to be configured for both the Primary and Secondary DNS, even if only the DNS is available.
- C. A DNS address should not be configured here.
- D. A DNS address does not need to be configured.
Answer: A
Explanation:
Explanation
The system requires the DNS server to resolve the host names for alarming and remote access name associated with the Avaya Service Center.You must supply a DNS address entry, even if it is unused and/or unreachable.
NEW QUESTION 47
The provisioning script automatically runs as part of the first boot-up of the Avaya Session Border Controller for Enterprise (SBCE). During this process you assign the Management IP address to the SBCE. You browse to the Element Management System (EMS) to continue to install the SBCE.
On the System Management > Devices web page, which status does the SBCE display before the Install link is clicked?
- A. Registered
- B. Commissioned
- C. Provisioned
- D. Ready
Answer: A
Explanation:
Explanation
References: Avaya Aura Session Border Controller Enterprise (2012), page 201
NEW QUESTION 48
If more than one Avaya BreezeTM node is available in the cluster, which statement about redundancy and load-balancing is true?
- A. The list of all Avaya BreezeTM nodes SM100 IP addresses must be configured in the client.
- B. The Cluster IP address is not used for Presence Services in 7.0. IM clients configure a FQDN instead of IP address which is resolved by a DNS server to all Avaya BreezeTM nodes in the cluster.
- C. IM clients point to the Leader Avaya BreezeTM node SM100 IP address which redirects the clients to a particular Avaya BreezeTM node based on load-balancing policy.
- D. IM clients point to any Avaya BreezeTM node SM100 IP address. The client is dynamically informed of alternate Avaya BreezeTM nodes in the cluster.
Answer: C
Explanation:
Explanation
Enable load balancing for a cluster if you want to scale the HTTP services without targeting a particular Avaya BreezeTM server. All the requests are sent to the cluster IP address. When you enable load balancing, two Avaya BreezeTM servers are chosen as the active and standby load balancing servers. The active load balancer distributes the HTTP requests to all the other servers in the cluster in a round robin fashion.
References: Administering Avaya Breeze, Release 3.1 (May 2016), page 16
https://downloads.avaya.com/css/P8/documents/101014143
NEW QUESTION 49
In Avaya Session Border Controller for Enterprise (SBCE) 7.x, which two configuration screens must be configured for Personal Profile Management (PPM) to be successfully downloaded to an Avaya SIP Telephone (AST)? (Choose two.)
- A. File Transfer
- B. Reverse Proxy
- C. PPM Services Mapping Profile
- D. Application Relay
Answer: C,D
Explanation:
Explanation
B: Application relays function as port forwards. Different clients require different application relays.
A: An Avaya SIP phone downloads and processes a configuration file, sends out a slew of SUBSCRIBE messages, and uses something called Personal Profile Manager (PPM).
Note: The PPM is a software module that runs as part of an Avaya Session Manager. It consists of a series of web services that phones use to retrieve and manage SIP related user data.
References:
https://andrewjprokop.wordpress.com/2014/03/28/understanding-avayas-personal-profile-manager-ppm/
https://downloads.avaya.com/css/P8/documents/101028355
NEW QUESTION 50
When looking at Avaya Aura System Manager - Home > Services > Replication, what is the name of the replica group representing the EDP / Avaya BreezeTM instances?
- A. CollaborationEnvironment_7.0
- B. Engagement Development Platform EDP_7.0
- C. CollaborationEnvironment_3.1
- D. Avaya BreezeTM_7.0
Answer: C
Explanation:
Explanation
Confirming that Avaya Breeze successfully replicates with System Manager Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate your newly-deployed Avaya Breeze.
4. After 2 - 15 minutes, verify that the status of the Synchronization Status field is green/ Synchronized. If not, see Repairing replication between Avaya BreezeTM and System Manager References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1, (December 2016), page 24
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 51
Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura Communication Manager (CM)? (Choose four.)
- A. completing the routing of incoming calls
- B. controlling specific calls or stations
- C. receiving notifications of events
- D. performing a remote reboot to the CM server
- E. invoking CM features
- F. adding new feature buttons to agent sets
Answer: A,B,C,E
Explanation:
Explanation
A: The services in the Event Report group provide a client application with the reports of events that cause a change in the state of a call, a connection, or a device.
B: The services in the call control group enable a telephony client application to control a call or connection on Communication Manager. Typical uses of these services are:
placing calls from a device
controlling a connection for a single call.
C: The services in the query group allow a client to query device features and static attributes of a Communication Manager device.
E: The services in the routing group allow Communication Manager to request and receive routing instructions for a call from a client application.
References: Avaya Aura Application Enablement Services TSAPI for Avaya Communication Manager Programmer's Reference Release 6.1, page 128
https://downloads.avaya.com/css/P8/documents/100141354
NEW QUESTION 52
What is the process for establishing a command line session to the AES Management IP Address, and logging in with the default account and default password?
- A. Use PuTTY to SSH to > AES Management IP Addr > using port 22, then enter login=craft password=crftpw.
- B. Use PuTTY to SSH to > AES Management IP Addr > using port 22, then enter login=cust password=custpw.
- C. Use PuTTY to SSH to > AES Management IP Addr > using port 222, then enter login=admin password=admin01.
- D. Use PuTTY to Rlogin to > AES Management IP Addr > using port 21, then enter login=admin password=admin.
Answer: A
Explanation:
Explanation
Use port 22, not port 21 or port 222.
Log in as craft and use the default password.
References: Application Enablement Services Installation and Upgrade Guide for a Bundled Server Release
4.0, page 29
https://downloads.avaya.com/elmodocs2/AES/4.0/02_300356_4.pdf
NEW QUESTION 53
......
Latest 100% Passing Guarantee - Brilliant 71300X Exam Questions PDF: https://prep4sure.examtorrent.com/71300X-exam-papers.html
