72201X Exam Practice Questions prepared by Avaya Professionals [Q11-Q32]

72201X Exam Practice Questions prepared by Avaya Professionals

Use Valid New 72201X Questions - Top choice Help You Gain Success

Avaya Aura® platform is a complex system that integrates multiple technologies and applications, including call routing, messaging, conferencing, and collaboration tools. The 72201X certification exam covers a broad range of topics related to the Avaya Aura® Core Components, such as system architecture, installation and configuration, troubleshooting, and maintenance. Candidates are expected to have a deep understanding of the platform's features and functionalities, as well as the ability to diagnose and resolve issues quickly and efficiently.

 

NEW QUESTION # 11
Which of the following commands can you use to check whether the Avaya Aura Session Manager (SM) application processes are running?

• A. Use the Linux command ps -ef | grep -i "SM"
• B. Execute the SM status all command.
• C. On the SM dashboard, select Status Applications from the Service State pull-down menu.
• D. Execute the SM CLI statapp command.
• E. On the SM dashboard, select Status Applications from the Shutdown System pull-down menu.

Answer: A,D

NEW QUESTION # 12
After implementation, the Avaya Aura Session Manager (SM) replication status is Not Polling, and both replica nodes are not reachable. The network connectivity has been verified, although Avaya Aura System Manager (SMGR) cannot connect to SM, but can connect to other network components. Based on an analysis of what is working and not working, where should the administrator try to isolate the issue?

• A. Avaya Aura Communication Manager (CM)
• B. Network switch configuration
• C. Avaya Aura System Manager (SMGR)
• D. Avaya Aura Utility Server (US)
• E. Avaya Aura Session Manager (SM)

Answer: E

NEW QUESTION # 13
Avaya Aura System Manager (SMGR) holds a copy of the Avaya Aura Communication Manager (CM) database, and it is important that the database is kept identical in both SMGR and CM.
If they ever stop being synchronized, what should be done to get them synchronized again?

• A. Go to the Inventory > Synchronize > Communication System, and synchronize the database from CM to SMGR.
• B. Go to the Inventory > Synchronize > Communication System, and send the database from SMGR to CM.
• C. Issue a save translations all command in CM.
• D. Go to the Replication page and issue a Repair of the database on SMGR.
• E. Use the command 'sync database' on both CM and SMGR to synchronize the databases.

Answer: A

NEW QUESTION # 14
Which statement is true about Interfaces and IP addresses on an Avaya Session Border Controller for Enterprise (SBCE) used for SIP Trunking and Remote Worker services?

• A. Only one interface should be configured per IP address.
• B. SIP Trunking and Remote Worker services must use different IP addresses and interfaces.
• C. SIP Trunking and Remote Worker services can share the same IP address and interface.
• D. SIP Trunking and Remote Worker services cannot run on the same SBCE.

Answer: B

NEW QUESTION # 15
When one Avaya SIP Telephone (AST) user agent calls another AST user agent, Session Manager goes through different phases of processing the call.
What is the maximum number of Phase Tags and what are they called?

• A. Two - origappseq and termappseq
• B. Two - imsorig and imsterm
• C. Four - imsorig, origdone, imsterm, termdone
• D. Three - ingress, process, egress

Answer: C

NEW QUESTION # 16
In which five states can an Avaya Aura System Manager (SMGR) Alarm exist? (Choose five.)

• A. Closed
• B. Active
• C. Pending
• D. Raised
• E. Acknowledged
• F. Ignored
• G. Resolved
• H. Cleared

Answer: B,D,E,G,H

NEW QUESTION # 17
Which four traces options can be useful when troubleshooting SIP endpoint registration issues with a phone using TCP protocol? (Choose four.)

• A. TLS handshaking
• B. RTP Flow
• C. Call Processing
• D. SIP Registration
• E. Network Interface
• F. PPM
• G. SIP Signaling

Answer: A,C,D,G

NEW QUESTION # 18
You are preparing to enable EASG to provide Avaya Services local and remote access for performing support and system optimization.
What are the three methods to enable EASG during the implementation? (Choose three.)

• A. Using the CLI command EASGManage after deployment
• B. Using SMGR web GUI, check the "Enable EASG" check box on the desired component in the Inventory/Manage Elements screen
• C. Using SSH to access Avaya servers
• D. Using the SDM after the deployment
• E. During the OVA deployment
• F. Open a ticket to Avaya services and request to enable it

Answer: A,B,E

NEW QUESTION # 19
Which three SIP requests are used to allow an AST endpoint to use features provided by an Avaya Aura Communication Manager (CM)? (Choose three.)

• A. NOTIFY
• B. CANCEL
• C. OPTIONS
• D. INVITE
• E. SUBSCRIBE
• F. REGISTER

Answer: A,C,E

Explanation:
Explanation
Source: https://downloads.avaya.com/css/P8/documents/100182495

NEW QUESTION # 20
Which statements describe the 8D Troubleshooting Methodology? (Choose three.)

• A. It is eight steps that define how to escalate third-party integration issues.
• B. It is eight steps that are only applicable to hardware issues.
• C. It is eight steps that guarantee a logical way to isolate an issue.
• D. It is eight steps that used to guarantee systems are operational after an implementation.
• E. It is eight steps that guarantee a thorough analysis of a failure, containment actions, full resolution, prevention for the future.
• F. It is eight steps that ensure a faster time to resolution.

Answer: C,E,F

NEW QUESTION # 21
In which two ways can you verify the Avaya Aura Communication Manager (CM) license status? (Choose two.)

• A. Using the CM System Administration Interface, access the WebLM > status license menu.
• B. Using the CM System Administration Terminal, run the status license command.
• C. Using the System Manager Web GUI, access the CM element > license menu.
• D. Using the CM Linux console interface, run the statuslicense command.
• E. Using the CM System Administration Terminal, run the test license command.

Answer: D,E

NEW QUESTION # 22
A SIP station to SIP station call on a single Feature or Evolution Server uses four signaling legs between CM and SM (not including the initial off-hook imsorig). When does Communication Manager insert the shortcut flag during call processing?

• A. during the dialing analysis phase (imsdialana) of call processing
• B. during the initialization phase (imsinit) of call processing
• C. during the termination phase (imsterm) of call processing
• D. during the origination phase (imsorig) of call processing
• E. during the routing phase (imsroute) of call processing

Answer: D

NEW QUESTION # 23
Refer to the Exhibit.

What are the necessary configurations needed to enable a call between AST 1011111 and Remote Worker AST 1011112? (Choose all that apply.)

• A. Configure the Remote Worker AST differently from the Office Worker AST in the Avaya Aura System Manager (SMGR) user profiles.
• B. Configure a trusted SIP Entity and Entity link for remote workers in Avaya Session Border Controller for Enterprise (SBCE).
• C. Set the Remote Worker AST to register from an IP address equal to the Avaya Session Border Controller for Enterprise (SBCE) Remote Worker Public IP address.
• D. Enable NAT traversal in Avaya Aura Session Manager (SM).
• E. Disable SIP Options in Avaya Session Border Controller for Enterprise (SBCE).

Answer: A,B,C,D

NEW QUESTION # 24
In the Avaya Aura Core, Communication Manager can be deployed in which two modes? (Choose two.)

• A. Evolution Server
• B. Communication Server
• C. Call Server
• D. Hybrid Server
• E. Feature Server

Answer: A,E

NEW QUESTION # 25
What are two functions performed by System Manager? (Choose two.)

• A. It provides SIP registration and authentication.
• B. It provides centralized management of enterprise-wide dial plans.
• C. It delivers a set of shared management services and a common console.
• D. If 'Direct IP-IP Auto Connections, H.323-H.323 two-party calls will shuffle to establish a direct media.
• E. If 'Initial IP-IP Direct Media' is enabled, SIP-SIP two party calls will use direct media.

Answer: B,C

NEW QUESTION # 26
When an Avaya SIP Telephone (AST) makes a call to another AST on the same Avaya Aura Communication Manager (CM), which of the following statements is true about the use of SIP trunk?

• A. It is used up to the point where calls are shuffled to establish a direct media path.
• B. It is used only when the media path is established.
• C. It is used just during call establishment and clear down only.
• D. It is not used at all.
• E. It is used for the entire duration of the call.

Answer: E

NEW QUESTION # 27
What are two functions performed by System Manager in Avaya Aura?

• A. It provides SIP registration and authentication.
• B. It provides centralized management of enterprise-wide dial plans.
• C. It establishes direct media for Direct IP-IP Audio Connections and h.323 two-party calls.
• D. It delivers a set of shared management services and a common console.
• E. None of the above
• F. It enables SIP-SIP two-party calls to use direct media with 'Initial IP-IP Direct Media' enabled.

Answer: B,D

NEW QUESTION # 28
A customer calls Avaya support after their telecom administrator was unable to add 50 new telephones for new hires. Avaya support determines that the number of telephone exceeds the capacity that the system supports.
Which pre-installation step was omitted and therefore caused this problem?

• A. Verifying the version installed is compatible with existing versions
• B. Checking the required number of SIP trunks
• C. Accessing support.avaya.com to verify customer systems compatibility
• D. Providing accurate licensing specifications

Answer: D

NEW QUESTION # 29
Which three are Avaya Subscription event packages? (Choose three.)

• A. avaya-ua-service-state
• B. avaya-cm-feature-status
• C. avaya-ldap-feature-status
• D. avaya-ccs-profile
• E. dialog

Answer: B,D,E

NEW QUESTION # 30
After implementation, Avaya Aura Session Manager (SM) replication status is Not Polling and the replica node is not reachable. The network connectivity has been verified, and so has the correct DNS configuration. Although Avaya Aura System Manager (SMGR) cannot connect to SM, it can connect to other network components.
Based on an analysis of what is working and not working, where should the administrator try to isolate the issue?

• A. Avaya Aura Communication Manager (CM)
• B. Avaya Aura System Manager (SMGR)
• C. Avaya Aura Utility Server (US)
• D. Avaya Aura Session Manager (SM)

Answer: D

NEW QUESTION # 31
You are submitting a package of information to Avaya Support for a case you are raising. The files that you are sending include a trace taken using WireShark.
Which file format will the file be in?

• A. pcap
• B. ws
• C. rar
• D. jpg

Answer: A

NEW QUESTION # 32
......

72201X Exam Practice Materials Collection: https://prep4sure.examtorrent.com/72201X-exam-papers.html