[Jan 24, 2022] HPE6-A66 PDF Questions and Testing Engine With 60 Questions
Updated Exam Engine for HPE6-A66 Exam Free Demo & 365 Day Updates
NEW QUESTION 10
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of a Floorplan and Building View
- B. Define the appropriate dimensions of each object in a Floorplan View
- C. Define the appropriate dimensions of a Floorplan View
- D. Define the appropriate dimensions of each room in a Floorplan View
Answer: B
NEW QUESTION 11
Which feature does the Aruba AP 387 support?
- A. 802.11 ax
- B. 60GHZRF
- C. included external directional antennas
- D. Indoor usage
Answer: B
NEW QUESTION 12
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. NetEdit
- B. Network Analysis Engine
- C. Mobility First
- D. 2 CiearPass
Answer: A
NEW QUESTION 13
A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?
- A. 303H
- B. 203R
- C. 0
- D. 1
Answer: B
NEW QUESTION 14
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Spectrum clearing
- B. Virtual
- C. Passive
- D. Active
Answer: D
NEW QUESTION 15
A network architect is designing a new wireless solution for a company The company needs seamless roaming and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?
- A. IAP VC
- B. Client Match
- C. Clustering
- D. AirMatch
Answer: C
NEW QUESTION 16
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?
- A. 802.11g
- B. 802.11ax
- C. 802.11ac
- D. 802.11n
Answer: B
NEW QUESTION 17
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 0
- B. 7240XM
- C. 1
- D. 2
Answer: D
NEW QUESTION 18
A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When creating a Campus view, how would the network architect pull in a map that displayed the campus location in a city?
- A. Create a screen capture from any web-based map site and import the picture file
- B. Import the longitude and latitude information from any web-based map site
- C. Use VisualRF's built-in map tool and define the appropriate longitude and latitude information
- D. Import the longitude and latitude information from Google Maps
Answer: B
NEW QUESTION 19
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 3-10 feet (1-3 m)
- B. 15-30 feet (5-10 m)
- C. 30-60 feet (10-20 m)
- D. 3 feet (1 m)
Answer: D
NEW QUESTION 20
Which feature does the Aruba AP 555 support? (Select two.)
- A. high density indoor locations
- B. three radios
- C. weather proof and temperature hardened
- D. 802.11ac and lower standards only
- E. desk wall plate mounted
Answer: A,D
NEW QUESTION 21
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 22
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Case-sensitive SSID name
- B. Wireless device MAC address
- C. Radio MAC address
- D. Case-insensitive SSID name
Answer: B
NEW QUESTION 23
A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?
- A. Minimum -80db, 1 AP per 1,000 square feet, very high-density design
- B. Minimum -70db, 1 AP per 2,500 square feet, capacity design
- C. Minimum -65db, 1 AP per 2,500 square feet, high density design
- D. Minimum -70db. 1 AP per 5,000 square feet, high density design
Answer: C
NEW QUESTION 24
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
- A. AirWave server
- B. enterpnse authentication server
- C. Active Directory server
- D. Aruba APs
- E. Aruba mobility controller
Answer: A,E
NEW QUESTION 25
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax,802.1lac, and 802.l1n
- B. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- C. Only 802.11ax and 8011.ac
- D. Only 802.11ax
Answer: A
NEW QUESTION 26
A network architect needs to plan a new wireless network
- A. Airwave, Central, and Windows only
- B. Airwave and Central only
- C. Airwave, Central, Windows, Mac OSX, and Linux
- D. Central only
Answer: B
NEW QUESTION 27
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. roaming between APs
- B. determining the RF channel bandwidth consumed per Barcode scanner
- C. providing consistent performance on all available channels
- D. encountering RF interference by devices
- E. implementing adequate security measures to ensure PCI compliance
Answer: C,E
NEW QUESTION 28
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
- A. three-tier and 40 Gbps
- B. two-tier and 40 Gbps
- C. two-tier and 10 Gbps
- D. three-tier and 10 Gbps
Answer: D
NEW QUESTION 29
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 30
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
- A. 56.350 square feet {5,235 square meters)
- B. 338,100 feet {31,410 square meters)
- C. 47.000 square feet {4,365 square meters)
- D. 55.750 square feet {5,175 square meters)
Answer: A
NEW QUESTION 31
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?
- A. AP power at 100% and a measurement of -65 dBM on the measuring device
- B. AP power at 75% and a measurement of -80 dBM on the measuring device
- C. AP power at 75% and a measurement of -90 dBM on the measuring device
- D. AP power at 50% and a measurement of -65 dBM on the measuring device
Answer: A
NEW QUESTION 32
A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?
- A. Spit the Building View into two Floorplan Views
- B. Define the appropriate properties in the Building View
- C. Define the appropriate properties in the Network View
- D. Create a Region in the Floorplan View
Answer: B
NEW QUESTION 33
A network architect is given the task to design a new network solution for NewStellar Company, Inc. NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1, Floor 2, including the central area, and that half the required APs will connect to each wiring closet, approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+ needs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 34
......
Exam Topics
The following are covered in HP HPE6-A66 practice exams and HP HPE6-A66 practice test:
- Gather and analyze data, and document customer requirements
- Recommend the solution to the customer
- Plan and design an Aruba solution percustomer requirements
- Evaluate the requirements, and select the appropriate Aruba solution for the design
- Produce a detailed design specification document
Exam Passing Guarantee HPE6-A66 Exam with Accurate Quastions: https://prep4sure.examtorrent.com/HPE6-A66-exam-papers.html
