NSE6_FWF-6.4 Exam Brain Dumps - Study Notes and Theory [Aug-2022]
100% Guaranteed Results NSE6_FWF-6.4 Unlimited 31 Questions
NEW QUESTION 15
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- B. A dedicated radio configured for background scanning can support the connection of wireless clients
- C. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- D. Background rogue scanning requires DARRP to be enabled on the AP instance
Answer: B,C
Explanation:
To enable rogue AP scanning
NEW QUESTION 16
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Increase the transmission power of the AP radios
- D. Install another AP in the reception area to improve available bandwidth
Answer: C
NEW QUESTION 17
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create wireless LAN specific policies
- B. Create a custom AP profile
- C. Preauthorize APs
- D. Set the wireless controller country setting
Answer: D
NEW QUESTION 18
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Gathering details about on site visitors
- B. Comparing current data with historical records
- C. Reporting potential threats by guests on site
- D. Predicting the number of guest users visiting on-site
Answer: A,B
NEW QUESTION 19
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- B. DARRP measurements can be scheduled to occur at specific times.
- C. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- D. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
Answer: B,D
Explanation:
According to Fortinet training: "When using DARRP, the AP selects the best channel available to use based on the scan results of BSSID/receive signal strength (RSSI) to AC" and "To set the running time for DARRP optimization, use the following CLI command within the wireless controller setting: set darrp-optimize {integer}. Note that DARRP doesn't do continuous spectrum analysis..."
NEW QUESTION 20
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Configure the APs individually by overriding the settings in Managed FortiAPs
- B. Configure the controller for the correct country code for Germany
- C. Clone a suitable FortiAP profile and change the county code settings on the profile
- D. Create a new FortiAP profile and change the county code settings on the profile
Answer: C
NEW QUESTION 21
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Disable intra-vap-privacy for the Authors vap-wireless network
- B. Increase the transmission power of the AP radio interfaces
- C. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- D. For both interfaces in the wtp-profile, configure vap-all to be manual
Answer: A,D
NEW QUESTION 22
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the AP CLI, using the cw_diag ksta command
- B. On the controller CLI, using the WiFi Client monitor
- C. On the AP CLI, using the cw_diag -d sta command
- D. On the controller CLI, using the diag wireless-controller wlac -d sta command
Answer: A
NEW QUESTION 23
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 58 Egress-VLAN-Name
- B. 83 Tunnel-Preference
- C. 65 Tunnel-Medium-Type
- D. 64 Tunnel-Type
- E. 81 Tunnel-Private-Group-ID
Answer: C,D,E
Explanation:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION 24
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 personal wireless network
- B. A WPA2 or WPA3 Enterprise wireless network
- C. An X.509 to authenticate the authentication server
- D. An X.509 certificate to authenticate the client
Answer: B,C
NEW QUESTION 25
What type of design model does FortiPlanner use in wireless design project?
- A. Analytical model
- B. Architectural model
- C. Integration model
- D. Predictive model
Answer: B
Explanation:
FortiPlanner will look familiar to anyone who has used architectural or home design software.
NEW QUESTION 26
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user usage stats
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user online activity
- D. Provides real-time insight into user movements
Answer: D
NEW QUESTION 27
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- B. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- C. Indicates channels that cannot be used because of regulatory channel restrictions
- D. Indicates channels that can be used only when Radio Resource Provisioning is enabled
Answer: D
NEW QUESTION 28
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA3 Enterprise
- B. Open, with radius MAC filtering
- C. WPA2 Personal and radius MAC filtering
- D. WPA2 Enterprise
Answer: D
Explanation:
Best security option is WPA2-AES.
NEW QUESTION 29
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. DHCP
- B. Broadcast
- C. Static
- D. Multicast
Answer: A
NEW QUESTION 30
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- C. DARRP measurements can be scheduled to occur at specific times.
- D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
Answer: A,D
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION 31
......
NSE6_FWF-6.4 Dumps PDF - Want To Pass NSE6_FWF-6.4 Fast: https://prep4sure.examtorrent.com/NSE6_FWF-6.4-exam-papers.html
